Crestron PAC2M Especificaciones descargar pdf (Pagina 14)

Professional Automation Mini Computer Crestron PAC2M

Setup

Network Wiring

When wiring the network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or damage

to the equipment. Please use the Crestron Power Calculator to help calculate

how much power is needed for the system

(http://www.crestron.com/calculators

• For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to maintain

signal quality.

For more details, refer to “Check Network Wiring” on page 21.

Ethernet

The PAC2M also uses high-speed Ethernet for communications between the device

and a control system, computer, digital media server and other IP-based devices.

For information on connecting Ethernet devices in a Crestron system, refer to the

latest version of the Crestron e-Control



Reference Guide (Doc. 6052), which is

available for download from the Crestron website.

Mounting the PAC2M in the Crestron Automation

Enclosure

This section covers both CAEN and CAENIB automation enclosures, for simplicity,

hereinafter referred to as CAEN.

CAUTION: The CAEN houses equipment that needs to be air-cooled. Therefore

mount in a well-ventilated area. The ambient temperature range must be 32°F to

104°F (0°C to 40°C). The relative humidity must range from 10% to 90% (non-

condensing). Furthermore, allow adequate clearance in front of the vented cover for

servicing and ventilation.

NOTE: The CAEN is intended for indoor use only.

NOTE: Reliable earth grounding of equipment mounted in a CAEN should be

maintained. Particular attention should be given to supply connections other than

direct connections to the branch circuit (e.g., use of power strips).

NOTE: To ensure access to the connectors and memory card slot at the bottom of

the PAC2M, mount the PAC2M so that all CLX-(or CLXI-)Series modules are

above it within the CAEN.

The PAC2M has two flanges that allow the unit to be mounted in a CAEN. Refer to

the latest revision of the CAEN – Automation Enclosures Installation Guide (Doc.

10 • Professional Automation Mini Computer: PAC2M Operations Guide – DOC. 6507A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Sin comentarios

Crestron PAC2M Especificaciones Pagina 14