Crestron ATC-AUDIONET Guía de instalación descargar pdf (Pagina 10)

Internet Radio Tuner Card Crestron ATC-AUDIONET

Setup

This section contains hardware installation and setup instructions for the

ATC-AUDIONET.

Required Tools/Hardware

• Small flat blade screwdriver

• Grounding strap (encouraged)

Installation

CAUTION: The ATC-AUDIONET and host system contain electrostatic discharge

(ESD) sensitive devices. Crestron encourages you to wear a grounding strap to avoid

damaging the card and/or the host system.

For AES, AMS, and AMS-AIP

Only

When inserting a card into an Adagio system that features tuner card slots you may

need to move other source connections if designated connectors are occupied by

other sources. For programming purposes, slots and source connections are matched

according to the following table:

Slot 1 Slot 2 Slot 3

Source

Connections

1 3 5

CAUTION: Do not connect external sources to SOURCES connectors used by

tuner cards.

CAUTION: Be certain to insert tuner card before applying power to the Adagio

Entertainment System.

Procedure

To install the ATC-AUDIONET:

1. Disconnect power from the host system.

2. Remove the slotted screws securing any cover plate that may be fastened to

the slot you intend to use then set the screws and the cover plate aside.

3. Unpack the ATC-AUDIONET card.

4. If the included memory card is to be used, it should be installed before

inserting the ATC-AUDIONET into the system. For details, refer to

“Memory Card” which starts on page 8.

6 • Internet Radio Tuner Card: ATC-AUDIONET Operations & Installation Guide – DOC. 6933A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Sin comentarios

Crestron ATC-AUDIONET Guía de instalación Pagina 10