Crestron C2N-TXM Especificaciones Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Crestron C2N-TXM XM
®
Satellite Radio Tuner
Hardware Hookup
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring” on page 8 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the C2N-TXM, use Crestron power supplies for
Crestron equipment.
Hardware Connections for the C2N-TXM
NET:
To Cresnet
Devices
AUDIO OUT:
To “CH” Devices
SIG:
To Remote
Sensitivity Indicator
SPDIF:
To Digital Audio
Receiver
AUDIO OUT:
To Analog Audio
Receiver
XM ANT:
From Supplied
Antenna
Ground
Antenna Placement
It is important to position the supplied high-gain antenna to receive the strongest
possible signal either from the satellite (preferred) or from a terrestrial repeater
station. This can be done before installing the XM Tuner in your Cresnet system.
Crestron recommends placing the antenna either outside or near a window with a
southern exposure. The antenna should face south if you are in the eastern half of the
continental US, or south/southeast if you are in the western half of the country.
If the antenna is placed outdoors, it should be in an area where there are no obstacles
within 20 to 60 degrees of elevation facing the southern sky. If the antenna is placed
where obstacles such as buildings or trees are in the path to the satellite, the antenna
may not receive a radio signal from the satellite. Certain areas provide satellite radio
ground repeaters that retransmit satellite radio signals. Extension cables are available
from Crestron.
The antenna shown below is included with the C2N-TXM.
Included XM Antenna
Operations Guide – DOC. 6234B XM Satellite Radio Tuner: C2N-TXM 9
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios