Crestron C2N-TXM Especificaciones descargar pdf (Pagina 17)

Crestron C2N-TXM XM

Satellite Radio Tuner

Sensitivity Indicator

Use the included Remote Sensitivity Indicator to optimize signal reception.

NOTE: The Remote Sensitivity Indicator is supplied with six-inch leads, labeled A

and B. Connect the leads to the included two-pin terminal block connector It may be

necessary to extend the wires if the antenna position is not within sight of the

C2N-TXM during adjustment.

1. Connect the Remote Sensitivity Indicator to the SIG port on the back of the

C2N-TXM.

2. Place the indicator near the antenna.

3. Using the following table, rotate and/or tilt the antenna to obtain the

strongest possible signal.

Remote Sensitivity Indicator Operation

LED SIGNAL

STRENGTH

COLOR STATE

OPERATION

Red On No Signal

Green Off

Red Flashing Weak

Green Off

Flashing rate is 250 msec

(1/4

sec)

(Slow blink)

Red Off Marginal

Green Flashing

Flashing rate is 50 msec

(1/20

sec)

(Fast blink)

Red Off Strong

Green On

4. When a strong signal is found, secure the antenna in position.

Operations Guide – DOC. 6234B XM Satellite Radio Tuner: C2N-TXM • 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Crestron C2N-TXM Especificaciones Pagina 17