Crestron TPS-MEM16MB Guía de instalación descargar pdf (Pagina 15)

Crestron TPS-MEM16MB & TPS-MEM32MB Flash Memory

Installation Guide - DOC. 5927 Flash Memory for TPS User Interfaces: TPS-MEM16MB & TPS-MEM32MB •• 11

5. As shown below, locate the memory socket.

Memory Socket Location

ROCKLEIGH, NJ 07647 USA

ELECTRONICS INC.CRESTRON

MIC OUTAUDIO INPUT

R+

R-

L+

L-

24 Y Z G

NET

SIDE CLIP

(ONE AT

EACH END)

LOCATION

OF MEMORY

SOCKET

WITH

MEMORY

MODULE

NOTE

POLARITY

OF MEMORY

MODULE

(NOTCH IN

CORNER OF

BOARD)

RS-232

6. Press the two metallic side clips of the socket securing the

original module in opposing directions and notice that the

module lifts up slightly.

7. Use even pressure while backing out the original module out

of the socket.

8. Observe polarity (as shown in the previous illustration) and

insert the new memory module into the socket at a slight

angle.

9. Apply even pressure to the module and level it off, parallel to

the motherboard. The two metallic side clips snap into place

as it becomes seated.

10. Return the PCB blank plate or TPS-VIDL expansion card.

CAUTION: If the expansion card is present, the TPS-VIDL connectors

may have to be aligned slightly to fit through the openings in the rear

cover. Aligned the connectors of this card (or any other optional card that

is installed) carefully to prevent damage to the card, cover, or

touchpanel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Crestron TPS-MEM16MB Guía de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para No Crestron TPS-MEM16MB