Crestron TPS-5000L Guía de instalación descargar pdf (Pagina 15)

Crestron TPS-VIDL-1/TPS-VIDL-2 Video Card for TPS/Lectern Panel

Attach Appropriate Video Cables

S-VIDEO

LUMINANCE

OR COMPOSITE

VIDEO INPUT #1

NTSC/PAL INPUT

CS ++ - - Y

C Y

COMP

S-VIDEO

CHROMINANCE

OR COMPOSITE

INPUT #2

S-VIDEO

LUMINANCE

OR COMPOSITE

VIDEO INPUT #1

S-VIDEO

CHROMINANCE

OR COMPOSITE

INPUT #2

ON TPS-VIDL-2, USE "COMP/Y" FOR SIGNAL 1

AND "C" FOR SIGNAL 2

NOTE: When using the TPS-VIDL-2 for receiving two video sources,

the “Comp/Y” connection will be used for Video Source 1 while the

chroma (C) connection will be used for Video Source 2.

NOTE: Up to four composite video feeds can be physically connected to

a TPS-VIDL-2 (two BNC feeds and two twisted-pair feeds). However,

only two video channels can be selected for viewing from the touchpanel

setup screen. Refer to “Configuring the Touchpanel” on page 12 for more

information.

NOTE: For additional information on video connections over CAT5,

refer to the latest version of the Crestron CAT5 Wiring Reference Guide

(Doc. 6137) which is available from the Downloads | Product Manuals

section of the Crestron website (www.crestron.com).

12. Reconnect all appropriate cables and install the touchpanel into

the wall or lectern.

NOTE: Refer to the latest revision of the TPS-4500L, TPS-5000L,

TPS-6000L, or TPS-TPI Operations & Installation Guide (Doc. 5891,

5825, 5783, or 5855, respectively) or, if applicable, BB-5000 or BB-6000

Installation Guide (Doc. 5826 or 5827) for the proper installation

procedure of the touchpanel. The latest version of the Operations Guide

Operations & Installation Guide - DOC. 6070 Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2 • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comentarios a estos manuales

Sin comentarios

Crestron TPS-5000L Guía de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para No Crestron TPS-5000L