Crestron TPS-5000L Guía de instalación descargar pdf (Pagina 6)

Video Card for TPS/Lectern Panel Crestron TPS-VIDL-1/TPS-VIDL-2

The TPS-VIDL-1 can automatically detect composite or S-video. The

TPS-VIDL-2 adds input for a second composite video source (on the

TPS-VIDL-2, Composite/S-Video can be auto-detected only when input

signal 2 is not used). When using the TPS-VIDL-2 for receiving two

video sources, the “Comp/Y” connection will be used for Composite

Video Source 1 while the chroma (C) connection will be used for

Composite Video Source 2.

Specifications

The table below provides a summary of specifications for the

TPS-VIDL-1 and TPS-VIDL-2 cards.

Specifications of the TPS-VIDL-1/VIDL-2

SPECIFICATION DETAILS

Power Requirements TPS-VIDL-1:

7 Watts (0.29 Amp @ 24 VDC)

TPS-VIDL-2:

12 Watts (0.50 Amp @ 24 VDC)

Control System Update Files

1,2,3

2-Series Control System Version C2-2004.CUZ or later

CEN/CN-TVAV Version 5.12.63v.UPZ or later

CNMSX-AV/PRO Version 5.12.63x.UPZ or later

CNRACKX/-DP Version 5.12.63w.UPZ or later

ST-CP Version 4.02.4S.UPZ or later

Isys™ Touchpanel Firmware

Version 1.018 or later

VT Pro-e Programming

Software

Version 3.0.0.8 or later

Video Types NTSC or PAL

Video Formats Composite or S-Video

Video Format Detection Within 2 seconds

Operating Temperature and

Humidity

50º to 113º F (10º to 45º C), 10

to 90% Relative Humidity (non-

condensing)

(continued on next page)

2 • Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2 Operations & Installation Guide - DOC. 6070

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sin comentarios

Crestron TPS-5000L Guía de instalación Pagina 6