Crestron TPMC-10-DSW Guía de instalación descargar pdf (Pagina 15)

Crestron TPMC-10-DSW Docking Assembly for TPMC-10

C2ENET-1-Device Slot in Configuration Manager

To incorporate a TPMC-10 into the system, the control system requires either a plug-

in Ethernet card, or a built-in Ethernet port. The MC2E control system has a built-in

Ethernet port in Slot 5 that can accept the TPMC-10 two-way wireless Ethernet

touchpanel. The slot allows Cresnet communication between the touchpanel and the

control system.

Drag the TPMC-10 from the Touchpanels | Touchpanels (Ethernet) folder of the

Device Library and drop it on the C2ENET-1 in Slot 5. The MC2E displays the

TPMC-10 at its default IP-ID location, “03,” as shown in the following graphic.

C2ENET-1 Device, Slot 5

Double-click the TPMC-10 icon to open the “Device Settings” window for the

touchpanel. Select the IP Net Address tab to change the touchpanel, or to set the

Default IP Address as shown below.

Touchpanel “Device Settings” Window

TPMC-10-DSW Symbol in Programming Manager

Programming Manager is where programmers “program” a Creston control system

by assigning signals to symbols. The symbol can be viewed by double-clicking on

the icon or dragging it into Detail View. A description for each signal in the symbol

is provided in the SIMPL Windows help file (F1).

Example Program

An example program for the TPMC-10-DSW is available from the “Example

Program” section of the Crestron website

(http://www.crestron.com/exampleprograms

). Search for TPMC-10-DSW.zip.

Operations and Installation Guide - DOC. 6400 Docking Assembly for TPMC-10: TPMC-10-DSW • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Crestron TPMC-10-DSW Guía de instalación Pagina 15