
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW
Setup
Ethernet
Unlike other Crestron network devices, the TPMC-8X-DSW does not use Cresnet
for communications between the device and the control system. The
TPMC-8X-DSW requires the use of a high-speed Ethernet connection for control
system communications.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-Control
Reference Guide (Doc. 6052).
Supplied Hardware
The hardware supplied with the TPMC-8X-DSW is listed in the following table.
Supplied Hardware for the TPMC-8X-DSW
DESCRIPTION PART NUMBER QUANTITY
TPMC-8X-DSW Assembly 2030077 1
TPMC-8X-DSW Bezel 4513545 1
Screw, #06-32 x 1-1/2”, Pan, Phil 2007254 4
Screw, 3mm x 6mm 2018276 2
Rubber Cap 2029706 2
Hardware Key 2018275 1
Connector, Plug, 2-Pin, Skt, Single 2030076 1
Connector, Plug, 5-Pin, Skt, Single 2030073 1
Mounting Options
The TPMC-8X-DSW Docking Station and TPMC-8X Series touch screens install
simply and cleanly into existing or newly constructed walls with an assortment of
pre- and post-construction mounting options. All mounting options are provided
separately from the actual touch screen. Refer to the following table for a complete
list of mounting options and respective Installation Guides.
Mounting Options for the TPMC-8X-DSW and TPMC-8X Series Touch Screens
PRE-CONSTRUCTION
1
OPTION
POST-
CONSTRUCTION
2
OPTION
MODEL
NUMBER
DOCUMENT
NUMBER
Back Box Kit - BB-8X-DSW 6579
Pre-Construction Mount Kit - PMK-8X-DSW 6580
Mud Mount Kit (accessory) - MMK-8X-DSW 6581
Trim Mount Kit (accessory) - TMK-8X-DSW 6582
- Wall Mount Kit – Mud WMKM-8X-DSW
3
6581
- Wall Mount Kit – Trim WMKT-8X-DSW
3
6582
1. Pre-construction refers to framed walls prior to hanging drywall.
2. Post-construction refers to framed walls with drywall hung.
6 • Wall Mount Docking Station for TPMC-8X: TPMC-8X-DSW Operations & Installation Guide – DOC. 7080B
Comentarios a estos manuales