Crestron CEN-COM Guía de instalación descargar pdf (Pagina 13)

Crestron CEN-HPRFGW High Powered RF Gateway

2. To determine which is pin 1 on the cable, hold the cable so that the end of the

eight pin modular jack is facing away from you, with the clip down and copper

side up. Pin 1 is on the far left.

3. In the event that modular cables or an RJ-11 to DB9F adapter is not available, the

following diagram provides information so that the cable can be fabricated on

site. (Alternatively, Crestron cable number STCP-502PC is sold separately.)

CTS

GND

RXD

TXD

RTS

n/c

TO PC

COM PORT

TO RS-232

PORT

Part #

748047-1

Part #

641337

Part #

AWC10152-A

4. The CEN-HPRFGW can be powered via the 12 VDC jack or the NET port. Be

sure to use a Crestron approved power supply as another may cause damage.

5. Only the included power supply should be used.

Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Sin comentarios

Crestron CEN-COM Guía de instalación Pagina 13