Crestron CEN-COM Guía de instalación descargar pdf (Pagina 24)

High Powered RF Gateway Crestron CEN-HPRFGW

Indirect

Indirect Communication

SERIAL,

ETHERNET

OR USB

CRESNET

PC RUNNING

CRESTRON TOOLBOX

CONTROL SYSTEM

CEN-HPRFGW

CEN-HPRFGW connects to control system via Cresnet:

1. Establish communication between the PC and the control system

as described in the latest version of the 2-Series Control Systems

Reference Guide (Doc. 6256).

2. Use the Address Book in Crestron Toolbox to create an entry for

the CEN-HPRFGW using the expected communication protocol

(Indirect). Select the Cresnet ID of the CEN-HPRFGW and the

address book entry of the control system that is connected to the

CEN-HPRFGW.

3. Display the CEN-HPRFGW’s “System Info” window (click the

icon); communications are confirmed when the device

information is displayed.

TCP/IP

NOTE: Required for operation with a Crestron control system.

Ethernet Communication

ETHERNET

PC RUNNING

CRESTRON TOOLBOX

CEN-HPRFGW

The CEN-HPRFGW connects to PC via Ethernet:

1. Establish serial communication between CEN-HPRFGW and PC.

2. Enter the IP address, IP mask, and default router of the

CEN-HPRFGW via the Crestron Toolbox (Functions | Ethernet

Addressing); otherwise enable DHCP.

3. Confirm Ethernet connections between CEN-HPRFGW and PC. If

connecting through a hub or router, use CAT5 straight through

cables with 8-pin RJ-45 connectors. Alternatively, use a CAT5

20 • High Powered Gateway: CEN-HPRFGW Operations & Installation Guide – DOC. 6587B

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Sin comentarios

Crestron CEN-COM Guía de instalación Pagina 24