Crestron NAT Guía de instalación Pagina 1

Crestron NAT Network Address Translator Reference Guide

2-Series Feature Crestron NAT IP Setup It is necessary to configure the control system NAT (C2ENET-2 card installed) to communicate over Ethernet u

Crestron NAT 2-Series Feature 5. Open the Crestron Viewport and select Functions | Set Control System IP Information from the menu bar. The “Set Con

2-Series Feature Crestron NAT 7. Click OK to accept the values. The “Success” window opens. “Success” Window 8. Click OK to enable the control sys

Crestron NAT 2-Series Feature Configure the following values: Host Name Assign an easy-to-remember identifier in the Host Name field. Rather than hav

2-Series Feature Crestron NAT Portmap Page The PORTMAP page, shown below, permits public access from the external network onto the internal network

Crestron NAT 2-Series Feature installed), colon (:), and external port (number for the item) from the Crestron Viewport. For example, to upload to th

2-Series Feature Crestron NAT Password Page The PASSWORD page, shown below, protects the NAT administrative rights from other users. Enter the same

Crestron NAT 2-Series Feature NAT Related Console Commands (for 2 Series only) COMMAND DESCRIPTIONADDPORTMAP Add a port map to the NAT tableNATENABLE

2-Series Feature Crestron NAT Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual

Crestron NAT 2-Series Feature If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will with

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647

2-Series Feature Crestron NAT Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exch

Crestron NAT 2-Series Feature This page intentionally left blank. Reference Guide – DOC. 6001 N

Crestron Electronics, Inc. Reference Guide – DOC. 6001 15 Volvo Drive Rockleigh, NJ 07647 12.02 Tel:

Crestron NAT 2-Series Feature Contents Network Address Translator: NAT 1 Introduction ...

Crestron NAT 2-Series Feature Network Address Translator: NAT Introduction The purpose of this document is to describe Crestron’s implementation of t

2-Series Feature Crestron NAT In local area networks, a node is any device connected to the LAN. Transparent, in this context, signifies that the

Crestron NAT 2-Series Feature Only one IP address is required if NAT is employed. The touchpanels on the LAN are recognized only by the single extern

2-Series Feature Crestron NAT when an internal node sends a packet to the external network, the NAT router intercepts the packet and replaces all i

Crestron NAT 2-Series Feature Setup Requirements NAT configuration can only be performed via the web server of a 2-Series control system. Therefore,