Crestron NAT Guía de instalación descargar pdf (Pagina 5)

Crestron NAT 2-Series Feature

Network Address Translator: NAT

Introduction

The purpose of this document is to describe Crestron’s implementation of the

Network Address Translator (NAT) with respect to a 2-Series Control system with

the optional Z-Bus card (C2ENET-2) installed.

Features/Functions of Crestron NAT

Crestron Network Address Translation (NAT) is a method of connecting multiple

Crestron IP devices and other IP enabled AV devices on an internal network (LAN)

to access the Internet (WAN) using one static IP address.

NOTE: The NAT throughput (from LAN B to LAN A) should not exceed 1Mbps

(megabits per second). Crestron does not recommend use of high-volume streaming

output devices such as IP-based codecs.

Feature/Function Summary

•

Built-In NAT Functionality

− Included in 2-Series Firmware

− Enabled Via Dual-Port Ethernet Z-Bus Expansion Card

(C2ENET-2)

• Single IP Addressing

− One External IP Address Represents Multiple Crestron IP

Device/IP enabled AV Devices in Internal Network.

− Controlled Access to Internal Services (eg., load touchpanels

individually through different ports)

• Secure Ethernet

− Built-In Firewall Protection

− Remote Diagnostics & System Maintenance

• Easy Configuration Through Friendly Web Pages

− Accessible via Browser

− Three Pages to Configure Entire System

• Support of up to 16 Portmaps (directing IP traffic from WAN side to

LAN side)

Reference Guide – DOC. 6001 Network Address Translator: NAT • 1

1 2 3 4 5 6 7 8 9 10 ... 21 22

Sin comentarios

Crestron NAT Guía de instalación Pagina 5