Crestron TPMC-8X-BTP Especificaciones descargar pdf (Pagina 17)

Crestron TPMC-8X Isys i/O

8.4” WiFi Touchpanel

Configuring the Touchpanel

NOTE: The only connection required to configure the touchpanel is power

(supplied from the internal battery, external battery or the included power pack).

The TPMC-8X is configured from the setup menu.

NOTE: If no project has been loaded or if an invalid project has been loaded, the

touchpanel displays an error message and defaults to the setup menu screen.

If a project is running, the setup menu can be accessed using one of three methods.

Via the Hard Keys

Press the four hard keys at the bottom of the touchpanel in sequence, from left to

right and again from left to right (i.e. press 1, 2, 3, 4, 1, 2, 3, 4) within a 10 second

period.

Via USB Keyboard

1. Attach a USB keyboard (refer to “Hardware Hookup” on page 47 for

details).

2. Open the “Validate User Account Info” window (shown below) by pressing

Ctrl+Alt+Shift on the keyboard.

“Validate User Account Info” Window

3. Enter the user account tpmcadmin, and the password tpmcadmin and touch

Validate.

NOTE: The password is case sensitive. After logging in, the password can be

changed from the “Security” window. Refer to “Security” on page 15 for more

information.

4. When the “TPMC-8X Debug Output” window appears (shown below),

select Project | Enter Setup Mode to enter the setup menu (refer to “Setup

Menu Details” which starts on page 15).

“TPMC-8X Debug Output” Window

Operations Guide – DOC. 6539C Isys i/O

8.4” WiFi Touchpanel: TPMC-8X • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 85 86

Sin comentarios

Crestron TPMC-8X-BTP Especificaciones Pagina 17