Crestron FT-PWR Guía de instalación descargar pdf (Pagina 16)

FlipTop Power Centers Crestron FT-PWR-D & FT-PWR-D-LG

Cables Threaded Through the Cable Plate

NOTE: Allow

approximately 40

inches clearance for

cables.

Cables passed through

cable support plate.

NOTE: Ensure that any cables you install have sufficient clearance to enable smooth

movement. Allow approximately 40 inches (~ 1 meter) from the top surface of the

FlipTop box.

Surface Mounting

The FT-PWR-D/-LG is designed to mount in a horizontal surface, such as a desk top,

lectern, or podium. The following diagram illustrates the required opening size to

accommodate the FT-PWR-D/-LG. Use the template supplied with the FT-PWR-D

or FT-PWR-D-LG (4010018 or 4007478, respectively) to make the cutout.

Cutout Dimensions for the FT-PWR-D (Not Actual Cutout Template)

5 5/16 in

(135 mm)

6 3/8 in

(162 mm)

MAXIMUM RADIUS

1/8 IN (4 MM)

12 • FlipTop Power Centers: FT-PWR-D & FT-PWR-D-LG Operations & Installation Guide – DOC. 6640C

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Crestron FT-PWR Guía de instalación Pagina 16