Crestron TPS-3000L Especificaciones Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
6.4" Lectern/Wall Mounted Touchpanel Crestron Isys™ TPS-3000L
Audio Setup Details (continued)
AUDIO
MENU
BUTTON
AUDIO
SETUP
SCREEN
DESCRIPTION
*
Line 88%
(On)
Line
Enable line level audio with the Line On button. Line
Off disables this feature. Adjust the volume with the
UP and DOWN buttons.
All Audio
(On)
All Audio
Control
All types of audio may be disabled with a single button
press. All Audio Off activates global muting. All
Audio On enables all audio.
Key Click
Enabled
(Vol. 29%)
Key Click
Click On enables the key click sound, Click Off
disables the key click. Adjust the volume with the UP
and DOWN buttons.
Mic AGC
On
AGC
The built-in microphone AGC (Automatic Gain Control)
is enabled by the Mic Audio AGC On button and
disabled with the Mic Audio AGC Off button.
Treble &
Bass
(49%)
Treble &
Bass
Two UP and DOWN buttons allow independent treble
and bass adjustment.
*Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown in red
on the touchpanel.
Video Menu
Video Screen
The TPS-3000L can display balanced and unbalanced composite video and S-Video
input supporting both NTSC/PAL formats. Select the Video button from the SETUP
MENU to display the video screen, shown to the left. The video source type can be
specified by selecting Select Input. The touchpanel can be configured to auto-detect
BNC and Twisted-Pair (TP) connections (S-Video or Composite) or can be set to a
specific connection type (BNC S-Video, BNC Composite, TP S-Video, TP
Composite). Select the appropriate input mode.
The Show Controls button on the video screen offers another screen with a series of
buttons, each is detailed in a table after this paragraph. After video parameters have
been set, select the Return button to return to the SETUP MENU.
NOTE: A solid blue screen is displayed in the video window if the video signal is
not detected or is very weak. Verify that the video source is functioning and properly
connected. Balanced video cable runs should not exceed 500 feet (152.4 meters) and
unbalanced video cable runs should not exceed 100 feet (30.5 meters). Cable runs in
excess of these lengths will weaken the video signal.
Video Setup Details
VIDEO
SCREEN
BUTTONS
1
DESCRIPTION
2
Brightness
UP button increases video image brightness, DOWN button
decreases video image brightness.
Contrast
UP button increases video image contrast, DOWN button
decreases video image contrast.
(continued on next page)
14 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L Operations Guide – DOC. 6077
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comentarios a estos manuales

Sin comentarios