Crestron DV-320-K Manual de usuario descargar pdf (Pagina 13)

Open communication systems.

For the integration of our controllers into an

existing automation topology, Beckhoff supports

all of the communication protocols commonly

used in the building automation market, such as:

BACnet, OPC UA,

Modbus TCP (automation level)

DALI, DMX, EnOcean, LON, EIB/KNX, SMI

MP-Bus, M-Bus, Modbus RTU (ﬁ eld level)

The Bus Terminal Controllers and PCs

communicate right into the room automation

level via an Ethernet network. This way, lower-

level ﬁ eldbus technology is not necessary in many

projects. Additional gateways for mapping the

data from lower-level ﬁ eldbuses are therefore not

required.

TwinCAT – efﬁ cient engineering for all

building systems.

The programming or parameterisation of all

systems takes place using TwinCAT automation

software. The PLC is programmed in accordance

with the IEC 61131-3 standard. Long-term access

to adequately qualiﬁ ed technicians is required

for the permanent safe operation of a building.

Since the majority of controllers worldwide are

programmed according to IEC 61131-3, the

TwinCAT system is ideal for engineering

in building automation. All programs are

programmable in the same language and are

available as function blocks in the building

automation libraries. Life cycle costs are reduced,

because the expenditure for maintenance

concentrates on the same programming software.

TwinCAT – efﬁ cient engineering

for all building systems

We reserve the right to make technical changes.

New Automation Technology

BECKHOFF

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Sin comentarios

Crestron DV-320-K Manual de usuario Pagina 13