Crestron TPMC-10-DSW Manual de usuario descargar pdf (Pagina 11)

Crestron MMK-8X-DSW & WMKM-8X-DSW Mud Mount Kits

Insert Mud Ring Plate into Opening

DRYWALL

HOLES FOR DRYWALL SCREWS

(NOT INCLUDED)

SCREW LENGTH SHOULD NOT

EXCEED DRYWALL THICKNESS

BY MORE THEN ½” (12.7MM)

MUD RING PLATE

(2017641)

8. Carefully pass the adjustment/mounting plate assembly through the opening

and rest the assembly against the interior surface of the drywall. Verify that

the adjustment plates are between the mounting plate and the drywall.

9. When the adjustment/mounting plate assembly is in position, bend the top

two flanges of the mud ring upward (approximately 90 degrees) and the

bottom two flanges downward (approximately 90 degrees). Refer to the

illustration on the following page.

NOTE: Adjustment/mounting plate assembly will have a slight play; this is normal.

It allows for minor adjustments to the entire assembly during installation.

Installation Guide – DOC. 6581B Mud Mount Kits: MMK-8X-DSW & WMKM-8X-DSW • 9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Crestron TPMC-10-DSW Manual de usuario Pagina 11