Crestron TPMC-10-DSW Manual de usuario descargar pdf (Pagina 9)

Crestron MMK-8X-DSW & WMKM-8X-DSW Mud Mount Kits

TPMC-8X-DSW Mounting Using MMK-8X-DSW – Exploded View

PUSH-ON FASTENERS (4)

(2004121)

ADJUSTMENT PLATE (2)

(2004825)

PMK-8X-DSW

DRYWALL

MUD RING

(2017641)

TPMC-8X-DSW

(Bezel removed)

TPMC-8X-DSW

MOUNTING SCREWS

(4) #06-32 X 1-1/2”

(2007254)

(Bezel)

WMKM-8X-DSW Procedure

This section provides the necessary steps for the assembly and installation of the

WMKM-8X-DSW into a wall. Review the procedure and complete the steps in the

order provided. The only tools or materials required and not supplied are a drywall

saw or equivalent, a level, four standard drywall screws, #2 Phillips screwdriver and

tools/material to apply drywall joint compound.

CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity

above and below the TPMC-8X-DSW for heat dissipation.

1. Insert the two pins on one adjustment plate into the top two outer holes on

the mounting plate, as shown in the illustration on the following page.

Installation Guide – DOC. 6581B Mud Mount Kits: MMK-8X-DSW & WMKM-8X-DSW • 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Crestron TPMC-10-DSW Manual de usuario Pagina 9