Crestron C2N-DAP8 Especificaciones descargar pdf (Pagina 15)

Crestron C2N-DAP8 Digital Audio Processor

Operations Guide – DOC. 8186 Digital Audio Processor: C2N-DAP8 • 11

6. Click Set ID to initiate the change. This will display the message "ID

command has been sent.”

7. In the "Command Complete" window, click OK.

8. In the Current Network Devices window, verify the new Net ID code.

(The Net ID can also be verified from the Diagnostics menu. Select the

Report Network Devices command.)

9. In the "Set Network ID" window, click Close.

NOTE: The new NET ID code may also be verified by selecting Diagnostic |

Report Network Devices in the Viewport (alternately, select F4).

10. Repeat this procedure for each C2N-DAP8 to be added to the system.

Method B (Touch Settable IDs)

Before using this method, you should have a list of all current network devices and

their Net IDs, to avoid assigning duplicate IDs.

Set Net ID by TSID

These procedures are for TSID-enabled network devices during the initial

configuration of a Cresnet system or when such devices are being added/replaced.

1. Ensure that all C2N-DAP8s are connected to the control system.

2. Open the Crestron Viewport version 3.35 or later.

3. From the Viewport menu, select Functions | Assign Cresnet ID by

Serial Number. The “Set Net ID by TSID” window appears. The

window is first displayed with the data fields empty.

“Set Net ID by TSID” Window

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Sin comentarios

Crestron C2N-DAP8 Especificaciones Pagina 15