Crestron C2N-DAP8 Especificaciones descargar pdf (Pagina 36)

Digital Audio Processor Crestron C2N-DAP8

32 • Digital Audio Processor: C2N-DAP8 Operations Guide - DOC. 8186

In either case, the filter frequencies are fixed, and the gain for each frequency is

adjustable from 5 dB to –10 dB. The default gain is 0 dB.

If you choose either three or five graphic equalizer filters, you can also specify up to

10 trim presets using the EQ Trim Preset drop-down list.

Parametric Equalizers

The Parametric EQ tab allows you to adjust the frequency response interaction

within the room for each speaker in the system. You can attempt to achieve a flat

room response, or you can enhance or attenuate the response at up to six different

frequencies. In general, a flat room response is not pleasing to most ears. The

purpose of achieving a flat response is to remove all unwanted audio conditions in

the equipment and listening environment before making adjustments to satisfy the

user’s personal listening preferences.

For each speaker in the system (up to eight), you can set the gain, bandwidth and

filter type at up to six different frequencies in the spectrum, for each of the five

preset listening modes. Use the Filter drop-down list to select the filter to be set. You

can set the frequency, gain and bandwidth values by typing them into the appropriate

boxes, or by clicking and dragging the control handles in the display. 0

The DAT software helps simplify a system setup by permitting you to copy and

paste filter or speaker or preset values from one to another.

The screen can also be set to display two equalizers at the same time. Select Options

| Number of Equalizers and click on 1 or 2 as desired. (Refer to the illustration on

the next page.)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Sin comentarios

Crestron C2N-DAP8 Especificaciones Pagina 36