Crestron C2N-DAP8 Especificaciones descargar pdf (Pagina 54)

Digital Audio Processor Crestron C2N-DAP8

50 • Digital Audio Processor: C2N-DAP8 Operations Guide - DOC. 8186

NOTE: If problems arise when transferring any Cresnet file (touchpanel

project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus

speed.

“Open” Window

4. Browse to the .upg file and click Open to begin the transfer.

Future upgrades may include upgrades to the DSP. In that event, the upgrade will

consist of an upgrade file (xxx.upg) plus one or more DSP files. The uploading

process would be the same, except that it will be important to load the accompanying

.upg file first, and then upload the DSP files.

Problem Solving

Troubleshooting

The following table provides corrective action for possible trouble situations. If

further assistance is required, please contact a Crestron customer service

representative.

C2N-DAP8 Troubleshooting

TROUBLE

POSSIBLE

CAUSE(S)

CORRECTIVE ACTION

C2N-DAP8

does not

function.

Incorrect power

supply.

Use a Crestron power supply with sufficient

power for the network.

PWR LED

does not

illuminate.

C2N-DAP8 is not

receiving power.

Verify that cable plugged into NET port is

secure.

(continued on next page)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Sin comentarios

Crestron C2N-DAP8 Especificaciones Pagina 54