Crestron QM-MD8x8 Especificaciones descargar pdf (Pagina 20)

QuickMedia Distribution System Crestron QM-MD8x8

“Serial Number to TSID Conversion Tool” Window

3. Enter the serial number or TSID number as instructed; press the

appropriate button to obtain the corresponding number.

NOTE: Enter serial numbers, including spaces, exactly as they appear on the unit

label. Alpha characters in serial numbers or TSID numbers may be entered in upper

or lower case.

Rack Mounting

WARNING: To prevent bodily injury when mounting or servicing this unit in a

rack, take special precautions to ensure that the system remains stable. The

following guidelines are provided to ensure your safety:

 When mounting this unit in a partially filled rack, load the rack from the

bottom to the top with the heaviest component at the bottom of the rack.

 If the rack is provided with stabilizing devices, install the stabilizers before

mounting or servicing the unit in the rack.

NOTE: If rack mounting is not required, rubber feet are provided for tabletop

mounting or stacking. Apply the feet near the corner edges on the underside of the

unit. Refer to “Stacking” on page 17 for details.

NOTE: Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct

connections to the branch circuit. (e.g., use of power strips).

Two “ears” are provided with the MD8X8 so that the unit can be rack mounted.

These ears must be installed prior to mounting. Complete the following procedure to

attach the ears to the unit. The only tool required is a #1 Phillips screwdriver.

1. There are screws (#4-40 x 0.3125" LG) that secure each side of the

MD8X8 top cover. Using a #1 Phillips screwdriver, remove the three

screws closest to the front panel from one side of the unit. Refer to the

diagram following step 3 for a detailed view.

2. Position a rack ear so that its mounting holes align with the holes

vacated by the screws in step 1.

16 • QuickMedia Distribution System: QM-MD8x8 Operations Guide - DOC. 6260

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sin comentarios

Crestron QM-MD8x8 Especificaciones Pagina 20