Crestron QM-MD8x8 Especificaciones descargar pdf (Pagina 9)

Crestron QM-MD8x8 QuickMedia Distribution System

Specifications

Specifications for the QM-MD8x8 are listed in the following table.

QM-MD8x8 Specifications

SPECIFICATION DETAILS

Power Requirements 30 Watts (1.25 Amp @ 24 VDC)

Default Net ID 06

Control System Update Files

2-Series Control System

1, 2

Version C2-V3.093.CUZ or later

Input Channels 8 QuickMedia channels over RJ-45

Output Channels 8 QuickMedia channels over RJ-45

QuickMedia Performance

Gain

Nominal input impedance

Nominal output impedance

Differential input impedance

Differential output impedance

0 dB

100 Ohms

50 Ohms common

QM-MD8x8 Firmware QM-MD8x8.v4.10.upg or later

Rack Space 1U high

Operating Temperature and Humidity 41º to 104º F (5º to 40º C),

10 to 90% Relative Humidity (non-condensing)

Dimensions and Weight Height: 1.70 in (4.32 cm) without mounting feet

Width: 17.03 in (43.24 cm) without mounting ears

Depth: 6.64 in (16.35 cm)

Weight: 3.6 lbs (1.6 kg)

1. The latest software versions can be obtained from the Downloads | Software Updates section of the

Crestron website (www.crestron.com). Refer to the NOTE following these footnotes.

2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product

Catalog for a complete list of 2-Series control systems.

NOTE: Crestron software and any files on the website are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users

may be required to register to obtain access to certain areas of the site (including the

FTP site).

Physical Description

The MD8x8 is housed in a black enclosure with labeling on the front and rear panels.

Twenty-two buttons with accompanying light emitting diodes (LEDs) on the front

panel are used for local control of source and destination signal switching. The

source and destination selection buttons can be custom-labeled with Crestron

Engraver software and 100-pound paper. Two LEDs on the front panel indicate

power and network activity. All QM, Cresnet

, and power connections are made to

the back of the unit. A pushbutton on the rear panel with an accompanying LED is

used to set the MD8x8’s network ID. Refer to the following illustrations of the front

and rear panels and the physical views.

Two mounting ears are provided for rack mounting, and four square rubber feet are

supplied for stability and to prevent slippage in tabletop placement or stacking

configurations.

Operations Guide - DOC. 6260 QuickMedia Distribution System: QM-MD8x8 • 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Comentarios a estos manuales

Sin comentarios

Crestron QM-MD8x8 Especificaciones Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Crestron QM-MD8x8