Crestron QM-MD8x8 Especificaciones descargar pdf (Pagina 30)

QuickMedia Distribution System Crestron QM-MD8x8

Setup | Communications Settings Command

3. Select RS-232 as the connection type. Verify that an available COM

port (COM 1 is shown after this step) is selected, and that all

communication parameters and necessary options from the “Port

Settings” window are selected as shown after this step. Click the OK

button to save the settings and close the window.

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a 2-

Series control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

4. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

26 • QuickMedia Distribution System: QM-MD8x8 Operations Guide - DOC. 6260

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sin comentarios

Crestron QM-MD8x8 Especificaciones Pagina 30