Crestron CHV-TSTATEX Guía de instalación Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Crestron CHV-TSTAT and CHV-THSTAT Thermostats
Operations and Installation Guide DOC. 8163E Thermostats: CHV-TSTAT and CHV-THSTAT
67
Slab 5 Systems
Pressing the MODE button allows the user to access the following screens when the thermostat is
configured for Slab 5 Systems.
Floor WarmingScreen
MODE
VIEW
Floor Warming
76
0
F
82
0
F
The “Floor Warming” screen appears when the MODE
button is initially pressed.
This screen displays current floor warming temperature
and setpoint.
Air System ModeScreen
MODE
VIEW
Air System Mode
HEAT COOL AUTO OFF
Pressing the MODE button again displays the “Air
System Mode” screen.
Use the up ▲and down ▼arrow buttons to select HEAT,
COOL, AUTO, OFF.
NOTE: The AUTO selection allows the system to switch
between HEAT and COOL automatically as needed to
maintain the temperature.
Slab System ModeScreen
MODE
VIEW
Slab System Mode
HEAT OFF
Pressing the MODE button again displays the “Slab
System Mode” screen.
Use the up ▲and down ▼arrow buttons to select HEAT or
OFF.
Fan ModeScreen
MODE
VIEW
Fan Mode
AUTO ON
Pressing the MODE button again displays the “Fan Mode”
screen.
Use the up ▲and down ▼arrow buttons to select AUTO or
ON.
NOTE: In AUTO, the fan runs only when the system calls
for heat or cool. In ON, the fan runs continuously.
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

Comentarios a estos manuales

Sin comentarios