Crestron Lighting Design Guía de instalación descargar pdf (Pagina 25)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

Terminal Blocks and Modules for CAEN Enclosures

The Crestron CLTI Terminal Blocks and Modules are considered a single entity and must be used together. They

ship separately to permit termination of the ﬁeld wiring to the terminal block prior to the installation of the module,

and are mounted in any Crestron Automation Enclosure (CAEN-Series Enclosures). The terminal block is designed

to terminate the circuit feed (HOT and NEUTRAL) and distribute the controlled circuit (LOAD) to the ﬁxtures. The

module connects to the terminal block and performs dimming or switching control of the loads.

NOTES:

• When connecting dimming loads to an arc fault breaker, the load should not exceed 1000 watts.

• Each terminal block includes a terminal rail for mounting the terminal block in the enclosure. Terminal rails

and blocks do not occupy a module space within an enclosure.

Terminal Blocks, Rails, and Labels (Left Side Units)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 81 82

Sin comentarios

Crestron Lighting Design Guía de instalación Pagina 25