Crestron Lighting Design Guía de instalación descargar pdf (Pagina 9)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

Lighting and Automation System Design Types

There are many ways in which a lighting control system can be organized. Construction type, client requirements,

architectural restrictions, and many other factors determine the best solution. In general, retaining control design

ﬂexibility produces the most reliable results.

Centralized Systems

A centralized system is one in which all the high-voltage circuits are terminated within a Crestron home automation

enclosure and operate under a central control system. In a centralized design, the high-voltage lighting, fans,

motors, and switch circuits are individually wired directly to the control modules in the Crestron home automation

enclosure. The modules are controlled by low voltage or RF user interfaces in the living area. This simpliﬁes the

high-voltage wiring and creates a ﬂexible and efﬁcient design.

A central processor, connected via a local area network to the lighting modules and the user interfaces, is

dedicated to lighting, fans, motors, HVAC, and security. Other processors that are dedicated to other home control

systems can communicate via Ethernet, RS-232, or RS-422 to the lighting processor and eliminate the need for

additional controls for other home systems. Separating home safety and life support systems from information and

entertainment systems provides a ﬂexible design solution and a fully integrated home control.

Centralized System Example

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 81 82

Sin comentarios

Crestron Lighting Design Guía de instalación Pagina 9