Crestron Lighting Design Guía de instalación Pagina 51

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 50
230 V Lighting Design Guide
Doc. 4859C | crestron.com
47
C2N-SDC-DC
The C2N-SDC-DC is a 2-channel shade and drapery controller
designed to provide a convenient and cost-effective solution for
controlling 24 Vdc motorized shades and drapes. The C2N-SDC-DC is
a Cresnet device with two independently controlled 24 Vdc outputs,
each designed to provide standard up and down or open and close
control of a conventional two-wire bidirectional type motor.
The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf
4 inch square or 2-gang electrical box. Push buttons on the front of
the unit allow for manual operation of the motors during installation
and setup.
C2N-SDC
The C2N-SDC is a 2-channel shade and drapery controller designed
to provide a convenient and cost-effective solution for controlling a
variety of motorized window treatments as well as motorized doors,
sunroofs, lifts, and projection screens. The C2N-SDC is a Cresnet
device with two independently controlled 120 Vac outputs. Each
output provides up/down or open/close control of a conventional
three-wire bidirectional type motor. Built-in timing and interlock logic
make it easy to program the C2N-SDC for failsafe operation.
The C2N-SDC mounts in the wall or ceiling using an off-the-shelf
4 inch square or 2-gang electrical box. Push buttons on the front of
the unit allow for manual operation of the motors during installation
and setup.
Shade and Drape Controllers
Refer to the C2N-SDC-DC and C2N-SDC product pages on the Crestron website for application diagram examples.
Vista de pagina 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 81 82

Comentarios a estos manuales

Sin comentarios