Crestron Lighting Design Guía de instalación descargar pdf (Pagina 33)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

Additional power supplies should not be mounted on CAEN-UMP plates in an enclosure that contains dimmer units

because this introduces low-voltage in the high-voltage section of the enclosure. If required, an extra power supply,

attached to a CAEN-UMP plate, can be added to a separate CAEN enclosure. Refer to the PAC2 Operations Guide

(Doc. 5941) on the Crestron website for more information.

CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so may cause equipment

damage or void the Crestron warranty.

External Power Supply Example

PAC2 Mounting in Double-Wide Enclosure Example

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Sin comentarios

Crestron Lighting Design Guía de instalación Pagina 33