Crestron CHV-TSTATEX-FCU Guía de instalación descargar pdf (Pagina 38)

infiNET EX Thermostat (Fan Coil Unit) Crestron CHV-TSTATEX-FCU

•

infiNET EX Thermostat (Fan Coil Unit): CHV-TSTATEX-FCU Operations & Installation Guide – DOC. 7206C

Glossary

Anticipators

Used to anticipate the drop or rise in temperature and energize the appropriate

system before reaching the setpoint. Anticipators affect how tightly the setpoint

temperature is maintained.

Auto Dead Band

Sets the minimum separation in auto mode between heat and cool setpoints

(with dual setpoints) or maximum drift before system latches alternate mode

(with single setpoint).

Blower (Fan)

An air-handling device for moving air in a distribution system.

Call

A call is the action taken by the thermostat when it sends a signal to turn on the

heating or cooling system.

Extended Cool

Extends the cool setpoint range to the full auto range of 38 to 99°F.

Humidity

The total amount of moisture in air. Relative humidity (RH) is the amount of

moisture in air, relative to its total capability based upon its temperature (dew

point). Moisture condenses on surfaces that are below this dew point.

HVAC

Heating, ventilation and air conditioning.

Setpoint

The user selectable temperature the system maintains.

Time Delay (Timer Guards)

Refers to a safety device or circuit that does not allow restart for 3 minutes.

1 2 ... 33 34 35 36 37 38 39 40

Sin comentarios

Crestron CHV-TSTATEX-FCU Guía de instalación Pagina 38